Introduction :
This post summurize the configuration to apply to register a third-party SIP device with Cisco CUCM.
CUCM configuration :
We need to configure :
- user (for its digest credential)
- device (which is linked to the previous user)
User Configuration :
Go to User Management > End User :
Add a new user or select one from LDAP synchronisation (depending on your configuration)
For SIP usage, on the user you need to configure the fields :
Digest Credentials
Confirm Digest Credential
These fields must contain the SIP Authentication password also configured on your SIP Third-Party Device.
Device Configuration :
Go to Device > Phone
For the device configuration, you need to specify :
Third-Party SIP Device (Basic) as product type.
Digest User must be populated with the userId of the user previously defined.
Go back to user Configuration :
On the user configuration.
Add your device to the Controlled Device with Device Association button.
Example of Third Party device configuration with Thomson ST2030 :
To configure SIP Account on ST2030 web admin page, enter the following URL :
http://<ip>/admin.html
default login/password are administrator/784518
Go to Setup > VoIP Service > Basic Setup
And configure Profile 1 :
Configure the account with
Phone Number -> DN
Phone Name
Authentication ID -> CUCM userID
Password -> CUCM Digest Credential
